KTM 950 Adventure
H.I.D Xenon lights
Another old modification I have done. Was an impulse purchase since the British pound was low and I ordered other stuff and threw in H.I.D lights for both low and high beam. All dual sport bike should have good lights! A large punch to open the rubber covers: A custom bracket out of thin aluminum … Continue reading
Rear Homemade Aluminum Tank
This I worked with early 2009 during the winter. Got some good help with problems I had on advrider. Had the rear spring out and had pulled the rear wheel up to see that I still could use the full suspension length and worked with cardboard to see what I could do: Some bending and … Continue reading
Side stand relocation for the KTM 950 Adventure
Since its winter and cold ill add some of the old modifications I have made to the bike. Enough posts on advrider about cracked engine cases to make me worried, so I decided to do a 950 side stand relocation.. First went with the bracket welded to the frame: But since I didn’t have any … Continue reading
Fat Foot for the KTM 950 Adventure
Since its winter and cold ill add some of the old modifications I have made to the bike. Started with a template in cardboard then cut out the pieces from some scrap aluminum and had it welded. Made a small notch in the stand with a bolt to stop it from rotating and a hole … Continue reading
KTM 950 Oil pump, spring and piston replacement
While replacing the clutch basket I also looked over the oil pump since I was in there. Had ordered a few new parts I suspected needed a change: Spring: 60038026000 Piston: 60038028000 Washer: 0988060121 Lock ring: 0472012010 With the clutch basket removed u can easily see the oil pump but its still quite hard to … Continue reading