So got the parts so continued with the replacement.
Used this guide as help a lot.
Extending the allen key to loosen the bolt holding the flywheel:
Made a home made grub screw to save the crank when pressing of the flywheel:
While in there I took out and cleaned the oil jet:
Left side was a little harder to get out, needed to pry out the engine bracket some also to change the chain guide:
Made a mistake and ordered two rear chain tensioners rails but they seemed to be the same so just pushed the metal part out and swapped side on that:
Ran into trouble with the balancer part i had removed not sure what way its supposed to be mounted will have to turn to the knowledge on advrider for help.